Key takeaways
- Passthrough versus capture: A card can capture at 1080p60 while passing a higher resolution to your monitor. If the card has no passthrough, you need a splitter.
- Latency: Lag-free passthrough matters for playing on the monitor while capturing. Playing on the capture preview in software adds delay.
- USB version: USB 3.0 lets a card handle more data. USB 2.0 cards rely on compression to reach 1080p60.
- HDCP: Consoles may block capture of protected content, and some cards cannot pass HDCP signals. Many consoles allow turning off HDCP in settings for gameplay.
- Software support: UVC cards work with OBS and most streaming programs without a driver.
- Warranty: Branded cards typically include a warranty, while generic dongles may not.
For 1080p60 console or camera capture under $100, the AVerMedia Live Gamer Mini (GC311) is the budget capture card most often named, and it suits streamers and recorders who do not need 4K or high refresh rates; buyers who want 4K60 passthrough or 1440p at high refresh rates are looking at the Elgato HD60 X tier, which generally sits above this cap, so confirm its current pricing.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Quick answer by use
A capture card takes the video signal from a console, camera or second PC and feeds it to your computer for recording or streaming. At this budget you get reliable 1080p60, usually over USB. What you give up is higher resolutions, HDR and very high refresh rate passthrough. If you only record gameplay from a PC you can use software capture and may not need a card at all, because a card is mostly for consoles, cameras and dual-PC streaming setups.
At a glance
| Card | Tier | Key stated specs | Best for | Limits |
|---|---|---|---|---|
| AVerMedia Live Gamer Mini (GC311) | Budget | The maker lists 1080p60 capture and passthrough, micro USB 2.0 with UVC, HDMI 1.4, hardware H.264 and AAC encoding, 100 x 57 x 18.8 mm, 74.5 g | Tidy 1080p60 on a budget with a branded warranty | No HDCP-protected signals, 4K, HDR or high refresh rates; USB 2.0 is dated |
| Generic HDMI-to-USB capture dongles (many unbranded sellers) | Cheapest | Listed as driverless HDMI-to-USB devices that act like a webcam | Occasional capture from cameras or boards | Chipset often not stated; little detail on latency or passthrough; usually no passthrough |
| Elgato HD60 X | Mid-range | Elgato lists 1080p60 capture, USB 3.0 and HDR and variable-refresh passthrough up to 4K60, with higher-refresh passthrough at lower resolutions such as 1440p at high refresh rates | Most gamers who want a variable-refresh-friendly passthrough | Usually above this cap |
AVerMedia Live Gamer Mini: the budget reference
The GC311 is a card often recommended when the budget is tight. The maker’s datasheet lists a maximum capture and passthrough resolution of 1080p at 60 frames per second, connection through a micro USB 2.0 port using the UVC standard, and an HDMI 1.4 input and output. It lists hardware encoding to H.264 with AAC audio, which takes processing load off the PC. It supports 1080p, 1080i, 720p, 576p, 480p and 480i inputs.
The UVC support means it works as a plug-and-play device on USB 2.0 or 3.0 ports without a driver installation, and it is powered over USB. It is small and light, which is handy for a laptop. Reviewers highlight lag-free passthrough at 1080p60; the downsides are the dated USB 2.0 interface and the limits listed by the maker: no HDCP-protected signals, no 4K, no HDR and no wide-angle or high refresh rate resolutions.
Other budget cards
Older budget cards such as the NZXT Signal HD60 and some other 1080p60 models may be discontinued or hard to find, so they are not recommended here; check the maker’s page for availability if you see one. Many roundups also list generic driverless HDMI-to-USB cards from unbranded sellers. Their listings rarely state the chipset or latency, and details could not be confirmed. If you buy one, expect basic capture, and test that it works with your streaming software.
Elgato HD60 X: the next tier
The Elgato HD60 X is a common pick for gamers. It is described as capturing 1080p60 over USB 3.0 and passing through higher resolutions and refresh rates than the capture itself. That passthrough matters if you want to play on a fast monitor while capturing. It is typically priced above this cap, so it appears here as the step up for players who care about passthrough quality.
What matters when choosing
- Passthrough versus capture: A card can capture at 1080p60 while passing a higher resolution to your monitor. If the card has no passthrough, you need a splitter.
- Latency: Lag-free passthrough matters for playing on the monitor while capturing. Playing on the capture preview in software adds delay.
- USB version: USB 3.0 lets a card handle more data. USB 2.0 cards rely on compression to reach 1080p60.
- HDCP: Consoles may block capture of protected content, and some cards cannot pass HDCP signals. Many consoles allow turning off HDCP in settings for gameplay.
- Software support: UVC cards work with OBS and most streaming programs without a driver.
- Warranty: Branded cards typically include a warranty, while generic dongles may not.
Setup notes
Connect the console’s HDMI out to the card’s input and the card’s output to your monitor. Connect the card to a USB port on the PC, ideally one directly on the motherboard rather than a hub. Select the card as a video device in your streaming software and set the resolution and frame rate to what the card supports. If the picture is black, check the console’s HDCP setting and the HDMI cable; if the video stutters, try another USB port and close other heavy applications.
Pick this if
| If you want | Pick | Why |
|---|---|---|
| Reliable 1080p60 on a budget | AVerMedia Live Gamer Mini (GC311) | Maker-listed 1080p60 capture and passthrough, UVC |
| The lowest possible cost | A generic HDMI-to-USB dongle, only if cost is critical | Cheapest, but specs are often unclear |
| Occasional camera capture | Generic HDMI-to-USB dongle | Cheap and driverless, with unknown chipset and usually no passthrough |
| 4K60 or high refresh passthrough | Elgato HD60 X | Above the cap |
| PC gameplay only | Software capture | No card needed |
Alternatives
- Software capture on the same PC: OBS or the graphics driver’s recorder can record gameplay without extra hardware.
- Console built-in capture: Current consoles can record clips and stream directly.
- Internal PCIe capture card: Better for dual-PC streaming but generally above this budget.
- Used capture cards: Acceptable if the seller offers returns, but confirm model details.
Resolution, frame rate and what you actually need
Many buyers pay for capabilities they will not use. If you stream or record at 1080p and 60 frames per second, which is the standard for most platforms, a 1080p60 card covers the need completely. Higher capture resolutions create bigger files, need more bandwidth and may be downscaled by the platform anyway. The area where a more expensive card matters is passthrough: if you play on a 1440p or high-refresh monitor and want to see the game at that quality while capturing, you need a card whose passthrough supports it, or a separate splitter that feeds both the monitor and a cheaper capture device.
Consider the signal source too. Consoles output over HDMI, and a card with HDMI input suits them. Cameras and camcorders may output a clean HDMI feed that works well with a basic card, which is a popular use for low-cost dongles in video calls and lectures. Older consoles and VCRs with analog outputs need a different kind of capture device with composite or component inputs, and the HDMI cards covered here will not work with them without a converter.
Also think about the computer. Hardware encoding on the card reduces the processing demand, which helps older laptops. Cards that send uncompressed video need a fast USB 3.0 port and more CPU or disk throughput. Use a dedicated port, avoid unpowered hubs and keep the cable short for the most reliable result.
Frequently Asked Questions
Can I capture 4K under $100?
The budget cards reviewed here capture at 1080p60 at most. Some cards pass 4K through to your display but capture at 1080p. True 4K capture sits in a higher tier.
Do I need a capture card to stream from a PC?
Not for a single PC, since software like OBS captures the screen directly. A card is useful for consoles, cameras and dual-PC setups.
Is USB 2.0 enough for 1080p60?
The AVerMedia Live Gamer Mini does it by encoding the video to H.264 on the card. The trade-off is more compression than a USB 3.0 card sending uncompressed video.
Why is my capture black on a console?
HDCP protection is the usual cause. Turn off HDCP in the console’s settings if the option exists, and use a cable and card that support the signal.
Are generic capture dongles safe to use?
They usually work as basic video inputs, but chipset, latency and warranty details are often missing. Buy from a seller with return options and treat them as a low-risk, low-expectation purchase.
Can I play on my monitor while capturing?
Yes, if the card has HDMI passthrough, which the Live Gamer Mini lists at up to 1080p60. Playing through the card keeps the picture lag-free, whereas watching the capture preview in software adds delay. For higher refresh rate monitors, look at a higher-tier passthrough card.
Will it work with my streaming software?
UVC cards work as a webcam-style video device in OBS and most programs. Check the maker’s compatibility list if you use a more specialized application.
Further reading
- Best PC Sound Card under $100: Picks and What to Look For (2026)
- Best 64GB RAM under $100: Picks and What to Look For (2026)
- Best AIO Cooler under $100: Picks and What to Look For (2026)
- Best DDR5 RAM under $100: Picks and What to Look For (2026)
- Best Motherboard under $150: Picks and What to Look For (2026)
