Key takeaways
- Compare five monitor stands and risers for home desks, from a metal drawer model to stackable and wood designs, with sizes, load limits, and fit tips.
A monitor placed flat on a desk often sits lower than a comfortable viewing line, and the base takes up room that could hold a keyboard or a notebook. A stand or riser lifts the screen by a few inches and opens up the patch of desk underneath, making a small home desk feel far less crowded during a long workday.
This guide compares five risers sold on Amazon: a metal model with a drawer, two adjustable plastic shelves, and two wood two-tier designs. Each suits a different desk, so the right pick depends on your monitor size, the load on the shelf, and how much storage you want below the screen.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most home desks, a simple platform riser is enough: pick the SimpleHouseware metal stand if you want a drawer, the WALI PTT001-B for three height choices, or the Amazon Basics riser for a light, stackable shelf. Wood two-tier models from FITUEYES and BONTEC suit desks that need a warmer look and open storage below.
How to choose
Begin with measurements. Note the width and depth of your desk, then measure the foot of your monitor, since the whole base has to sit on the platform without hanging over an edge. A compact desk may only fit a shelf around 14 to 16 inches wide, while a long desk can take a wider two-tier unit.
Next, check the load. Add up the weight of the monitor and anything else you plan to place on the shelf, then compare it with the load figure in the listing. A light plastic riser with a 22 pound limit suits a small monitor or a laptop, while heavier screens call for metal or wood with a higher figure.
Height matters just as much. A fixed riser gives one set lift, often near 4 to 5 inches, and that fixed height should be stated plainly before you buy. An adjustable model offers two or three set heights, which helps when the desk or chair changes. A riser is not an arm: it cannot tilt or swivel the screen, so pick it when a steady shelf is all you need.
Finally, think about storage and material. A drawer hides small supplies, open space under a shelf fits a keyboard, and a second tier holds papers. Metal feels firm and wipes clean, wood warms up the look of a room, and plastic keeps the unit light and easy to move.
SimpleHouseware Metal Desk Monitor Stand Riser with Organizer Drawer
This SimpleHouseware stand pairs a steel mesh platform with a slide-out drawer and side bins, so it works as both a riser and a small organizer. The platform measures 16.5 by 11.5 inches, wide enough for the base of a typical home monitor, and the fixed rise is 4.5 inches.
The mesh top lets air move under a laptop if you use the shelf that way, and the listed load figure of 44 pounds covers most single monitors. The drawer suits pens, sticky notes, and charging leads, while the side bins hold a phone or a remote. Because the height is fixed, measure your desk and chair setup first; if 4.5 inches of lift does not suit you, pick an adjustable model below.
Specs:
– Brand: SimpleHouseware
– Material: Steel mesh platform
– Platform size: 16.5 x 11.5 inches
– Rise height: 4.5 inches, fixed
– Load capacity: Up to 44 pounds
– Storage: Slide-out drawer and side bins
– Color: Black
WALI Computer Monitor Stand for Desk (PTT001-B)
The WALI PTT001-B is a plastic riser built around choice: its legs set the shelf at 4.5, 5.3, or 6.1 inches, so you can raise the screen in steps as you settle on a comfortable viewing position. The platform measures 14.6 by 9.3 inches and holds up to 44 pounds, which covers many monitors, laptops, and small printers.
Rubber pads under the legs help the stand stay put and guard the desk surface. The open area beneath the shelf works as storage for a keyboard or notebooks, handy on a shared family desk. Plastic keeps the unit light and easy to carry between rooms, though it feels less firm than metal under a heavy screen. The 14.6 inch width also leaves room beside the stand for speakers or a lamp.
Specs:
– Brand: WALI
– Model: PTT001-B
– Platform size: 14.6 x 9.3 inches
– Height options: 4.5, 5.3, or 6.1 inches
– Load capacity: Up to 44 pounds (20 kg)
– Material: Plastic shelf with vented holes
– Feet: Rubber pads
Amazon Basics Height Adjustable Monitor Stand Riser with Storage Organizer
Amazon Basics takes a stackable route: detachable legs let you set this ABS plastic riser at 2.87, 4.2, or 4.8 inches, so the height changes by adding or removing a level rather than by turning any dial. The unit measures 16.1 by 11 by 4.88 inches overall, and the top surface is about 11.6 by 11 inches at the center with tapered sides, so check your monitor foot against that surface before you order.
The listed load limit is 22 pounds, which points this model toward light monitors and laptops rather than heavy screens. At 2.6 pounds, the riser itself is easy to lift, store, or move to another room, and the open space below works as a storage organizer for a keyboard or small supplies.
Specs:
– Brand: Amazon Basics
– Model: DHMSA
– Material: ABS plastic
– Product dimensions: 16.1 x 11 x 4.88 inches
– Height options: 2.87, 4.2, or 4.8 inches
– Load capacity: Up to 22 pounds (10 kg)
– Item weight: 2.6 pounds
– Color: Black
FITUEYES 2-Tier Monitor Stand (DT204201WO)
The FITUEYES DT204201WO is a wood riser with two levels: an upper shelf for the monitor and a lower tier for a laptop, keyboard, or paperwork. It is made from 12 mm medium density fiberboard and measures 16.7 by 9.3 by 5.5 inches, so the top shelf raises the screen by about 5.5 inches in one fixed step. The shelf is listed with a capacity of 50 pounds, the highest figure in this group.
The two-tier layout is the main reason to choose it over a single shelf, since the lower level gives notebooks a home instead of letting them spread across the desk. Assembly is required, and the parts include the top shelf, middle shelf, and two side support panels. At 4.84 pounds net weight, it stays put without feeling bulky. Keep the fiberboard away from spills so the finish holds up.
Specs:
– Brand: FITUEYES
– Model: DT204201WO
– Material: Medium density fiberboard (MDF), 12 mm
– Dimensions: 16.7 x 9.3 x 5.5 inches
– Shelf capacity: 50 pounds (22.7 kg)
– Net weight: 4.84 pounds
– Assembly: Required
– Color: Black
BONTEC 2-Tier Wooden Monitor Stand Riser
BONTEC offers a two-tier wooden riser that lifts the screen by 142 mm, about 5.6 inches, on a platform measuring 42 by 23.5 cm. The listed load figure is 30 kg, well above what a single home monitor usually weighs, and the lower level holds a keyboard or notebook. Cable slots at the back help leads drop down neatly instead of trailing across the desk.
Small touches set this model apart: a phone holder gives your handset a fixed spot, and non-slip pads keep the stand steady on smooth desktops. At 2.3 kg it feels solid once placed, yet it can still be moved when you rearrange the room. As with the FITUEYES, the height is fixed, so measure first and be sure a 5.6 inch lift suits your chair and desk pairing.
Specs:
– Brand: BONTEC
– Model: FBA_MTR-S2
– Material: Wood
– Dimensions: 42 x 23.5 x 14.2 cm
– Rise height: 142 mm, fixed
– Load capacity: Up to 30 kg
– Item weight: 2.3 kg
– Features: Cable management slots, phone holder, non-slip pads
– Color: Black
Who should skip
Skip risers altogether if your monitor lacks a stable flat base, since every model here holds the screen on its own factory stand. If you need tilt, swivel, or a screen that floats above the desk, look at a VESA arm instead. Very heavy all-in-one computers may pass the load limit of the lighter plastic models, so check the figure in the listing before you buy. A riser also will not help if your desk is already tall, since the screen could end up above a comfortable line of sight.
FAQ
How much height should a monitor riser add?
Most home desks need a lift in the range covered here, roughly 3 to 6 inches. Sit in your usual chair, note where your eyes fall on the screen, and pick a riser that brings the upper part of the display near that line. Adjustable models make this easier, since you can change the setting later.
Can a monitor riser hold a laptop or a printer?
Yes, as long as the device fits the platform and stays under the listed load figure. The WALI shelf is listed for monitors, laptops, and printers up to 44 pounds, and its vented top helps warm air escape. Measure the base first, because a wide printer foot may overhang a narrow shelf.
What is the difference between a riser and a monitor arm?
A riser is a shelf: the monitor keeps its own stand and rests on top, and the height is either fixed or set in steps. An arm clamps to the desk, holds the screen by its VESA holes, and can tilt, swivel, and move in more directions. Choose a riser for simplicity and storage, an arm for movement.
How do I keep a riser steady on the desk?
Place it on a flat, clean surface, keep the full base of the monitor on the platform, and stay under the load figure in the listing. Models with rubber pads or non-slip feet grip smooth desktops well. Avoid stacking books under a riser to gain height, since that stack can shift.
Final verdict
For most home desks, the SimpleHouseware metal stand is the easy first pick: a firm platform, a useful drawer, and a 44 pound load figure. Choose the WALI PTT001-B when you want three height settings on a narrow desk, or the Amazon Basics riser for a light stackable shelf. If wood suits your room better, the FITUEYES two-tier stand offers the highest listed capacity in this group, while the BONTEC adds cable slots and a phone holder. Measure your desk, weigh your screen, and match those two numbers to a listing before you order.
Further reading
- Best Monitor Risers for Desk Setups and Small Spaces Picks
- Best Laptop Stands for Desk Setups and Home Offices Picks
- Best Desk Organizers for Home Office Drawers and Tops
- Best LED Strip Lights for Desk and Monitor Glow Picks
- Best Laptop Cooling Pads for Desk Work and Play Picks Guide
- Best USB Cables for Desk Charging and Data Runs Picks Guide



