Key takeaways
- Five monitor arms compared on screen size, weight capacity, VESA fit, lift type and cable routing for a clean, adjustable single screen desk setup.
The stand that ships with most monitors does two things poorly: it fixes the screen at one height, and its base eats a wide patch of desk where your keyboard and notebook want to live. A monitor arm lifts the screen off the surface, frees that footprint, and lets you set height, depth and angle to match your chair and your posture.
This guide compares five single monitor arms sold on Amazon, chosen because they cover the screen sizes and weights most desks use. The picks differ in lift type, size range and mounting hardware, so the right one depends on your monitor and your desk. Each entry uses only facts from its own Amazon listing, and the sections after the picks explain how to match an arm to your setup.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most single-screen desks, the HUANUO HNSS28B and ErGear EGDMA71B cover the widest ground: 13 to 34 inch screens, VESA 75×75 and 100×100 fit, and clamp mounting that clears the desktop. Choose the VIVO STAND-V101BB for an aluminum build, the MOUNTUP MU0004 for a lighter screen, and the Amazon Basics arm for smaller monitors.
How to choose
Begin with the back of your monitor. Every arm here mounts through VESA holes, in 75x75mm or 100x100mm patterns, so confirm your screen has one of those patterns first. Next, weigh the monitor without its factory stand and check the figure against the arm’s listed range. An arm used near the top of its range can drift downward over time, and one used below its minimum may refuse to sink low, so a screen that sits mid-range behaves best.
Screen size matters less than weight, but stay inside the listed range anyway, because arm geometry is designed around it. Then look at your desk. Clamp bases grip the rear edge and suit most desks, while grommet bases pass through a cable hole and suit desks with a blocked rear edge. Check the listed desktop thickness range for the clamp.
Finally, pick a lift type. Gas spring arms move with a light touch and hold position through spring tension you adjust to your screen’s weight. Mechanical spring arms, like the VIVO below, use a spring and a gauge you set by hand and tend to feel firmer. Either way, built-in cable routing along the arm keeps leads off the desk, which is where most of the clean look comes from.
HUANUO Single Monitor Mount, HNSS28B
HUANUO’s HNSS28B is the broad fit pick of this group. Its listing covers screens from 13 to 34 inches and weights up to 22 lbs, the highest ceiling here, which makes it a sensible home for a larger panel or an older, heavier screen. It mounts with either a C-clamp or a grommet base, both included, so it suits desks with or without a cable hole.
Motion is generous: the listing gives tilt from +90 to -35 degrees, swivel of plus or minus 90 degrees, and full 360 degree rotation, so portrait work is on the table. Integrated cable sleeves run along the arm and hide the leads, and the listing notes the spring tension ships set to medium and should be adjusted to your monitor’s weight for balance. For a single screen desk that needs to stay tidy, this is the arm to build around.
Specs:
– Brand: HUANUO
– Model: HNSS28B
– Screen size: 13 to 34 inches
– Weight capacity: up to 22 lbs
– VESA: 75x75mm or 100x100mm
– Mounting: C-clamp and grommet base
– Motion: tilt +90 to -35 degrees, swivel plus or minus 90 degrees, rotation 360 degrees
– Cable routing: integrated cable sleeves
– Color: Black
ErGear Single Monitor Arm, EGDMA71B
The ErGear EGDMA71B matches the HUANUO in the areas that matter most: screens from 13 to 34 inches, VESA 75×75 and 100×100 fit, and support for monitors up to 19.8 lbs. Where it differs is the base. This model uses an integrated C-clamp, which the listing presents as a stability feature, with the clamp built into the arm rather than added as a separate bracket.
ErGear also calls out upgraded cable management on this model, so leads run along the arm instead of dangling behind the desk. The black finish and single clamp footprint keep the rear edge of the desk looking simple. If your desk edge is clear and you do not need a grommet option, this is a clean way to float a mid-size or large screen and reclaim the space under it.
Specs:
– Brand: ErGear
– Model: EGDMA71B
– Screen size: 13 to 34 inches
– Weight capacity: up to 19.8 lbs
– VESA: 75x75mm and 100x100mm
– Mounting: integrated C-clamp
– Cable routing: upgraded cable management
– Color: Black
VIVO Premium Aluminum Single Monitor Desk Mount, STAND-V101BB
The VIVO STAND-V101BB is the build quality pick. It is made from aluminum rather than the steel common in this group, and it uses a mechanical spring lift with a built-in elbow spring gauge, so you dial the support to your screen and the setting stays put. The listing covers flat and curved screens from 17 to 32 inches up to 17.6 lbs.
Adjustment numbers are wide: tilt from -90 to +90 degrees, 180 degree swivel, 180 degree rotation, 10 inches of height adjustment and a maximum extension of 25 inches. The quick release VESA plate accepts 75x75mm and 100x100mm patterns, which speeds up fitting and removal. Mounting is flexible too: the desk clamp installs from the top side of the desk, a grommet mount is included, and the listed desktop thickness range runs from 0.39 to 2 inches. A 3-year manufacturer warranty from the listing rounds out a polished package.
Specs:
– Brand: VIVO
– Model: STAND-V101BB
– Material: Aluminum
– Screen size: 17 to 32 inches, flat and curved
– Weight capacity: up to 17.6 lbs
– Lift: mechanical spring with elbow spring gauge
– Motion: tilt -90 to +90 degrees, swivel 180 degrees, rotation 180 degrees
– Height adjustment: 10 inches; maximum extension 25 inches
– VESA: quick release plate, 75x75mm and 100x100mm
– Mounting: topside desk clamp and grommet mount; desktop thickness 0.39 to 2 inches
– Cable routing: integrated cable management
MOUNTUP Single Monitor Desk Mount, MU0004
The MU0004 is MOUNTUP’s long-running single arm, aimed at the middle of the market: screens up to 32 inches, weighing from 4.4 to 17.6 lbs, with VESA patterns of 75x75mm and 100x100mm. A gas spring does the lifting, so height changes take a light push, and the arm offers full motion adjustment for tilt, swivel and rotation.
Both a clamp and a grommet mounting base are in the box, which keeps it in play for desks with a cable hole and desks without one. The minimum weight in the listed range is worth noting: very light small monitors under 4.4 lbs may sit too high on a spring tuned for heavier panels, so weigh your screen first. For the common case of a 24 to 32 inch work monitor of ordinary weight, the MU0004 covers the brief with a tidy run for cables along the arm.
Specs:
– Brand: MOUNTUP
– Model: MU0004
– Screen size: up to 32 inches
– Weight range: 4.4 to 17.6 lbs
– VESA: 75x75mm and 100x100mm
– Mounting: clamp and grommet base
– Lift: gas spring, height adjustable
– Motion: full motion tilt, swivel and rotation
Amazon Basics Gas Spring Single Monitor Arm, DS-MADSBE
Amazon’s own arm is the compact desk pick. The DS-MADSBE is a gas spring single arm listed for monitors from 15 to 27 inches weighing 4.4 to 15.4 lbs, which describes a large share of home office screens. Motion figures from the listing are strong for its class: tilt from -90 to +85 degrees, swivel of plus or minus 90 degrees, 360 degree rotation, and extension out to about 20.5 inches.
Mounting covers both clamp and grommet fitting, and the listed desk thickness range is wide, from about 0.39 to 4 inches, so it handles slim desktops and thick tops alike. VESA support is the familiar 75x75mm and 100x100mm pair, and the listing backs the arm with a 1-year limited warranty from Amazon Basics. If your screen is 27 inches or under and mid-weight, this arm gives you the full gas spring experience and tidy cables along the arm.
Specs:
– Brand: Amazon Basics
– Model: DS-MADSBE
– Lift: gas spring
– Screen size: 15 to 27 inches
– Weight range: 4.4 to 15.4 lbs
– VESA: 75x75mm and 100x100mm
– Motion: tilt -90 to +85 degrees, swivel plus or minus 90 degrees, rotation 360 degrees
– Extension: up to about 20.5 inches
– Mounting: clamp and grommet; desks about 0.39 to 4 inches thick
Who should skip
Skip this whole category if your monitor has no VESA mounting holes and no adapter is available for it, because every arm here attaches through those holes. Skip it as well if you run two screens: all five picks hold one monitor each, so a dual setup needs a dual arm or two singles. Screens heavier than 22 lbs, and ultrawide panels above the listed size ranges, need a heavy duty arm built for that load. If your desk has a fragile edge, a glass top, or no reachable rear edge and no cable hole, solve the mounting surface first.
FAQ
How do I know if my monitor fits one of these arms?
Check three things. The screen size should fall inside the arm’s listed range, the monitor’s weight without its stand should sit inside the listed weight range, and the back of the monitor should have VESA holes spaced 75x75mm or 100x100mm apart. If all three line up, the arm fits.
What is the difference between a gas spring and a mechanical spring arm?
A gas spring arm, like the HUANUO, MOUNTUP and Amazon Basics picks, uses a sealed gas cylinder to counterbalance the screen, so it moves with a light touch once you set the tension. A mechanical spring arm, like the VIVO, uses a coil spring and a gauge you adjust by hand. Both hold position well when matched to the screen’s weight.
Should I use the clamp base or the grommet base?
Use the clamp when the rear edge of your desk is clear and within the listed thickness range; it fits without drilling. Use the grommet base when the rear edge is blocked by a wall panel or modesty board and your desk has a cable hole the mount can pass through.
How do I keep cables tidy once the arm is fitted?
Route the power and display leads along the arm using the built-in channels, sleeves or clips each listing describes, and leave a gentle loop of slack at the screen end so the monitor can move through its full range without tugging.
Final verdict
For a clean, adjustable single screen desk, the HUANUO HNSS28B is the safest all-round pick here, with the widest weight ceiling and both mounting bases in the box. The ErGear EGDMA71B is its close rival if you prefer an integrated clamp. Choose the VIVO STAND-V101BB for aluminum build, the MOUNTUP MU0004 for an ordinary mid-size screen, and the Amazon Basics DS-MADSBE for a smaller monitor on almost any desk thickness. Match the VESA pattern and weight range first, and any of the five will tidy your desk.
Further reading
- Best Monitor Risers for Desk Setups and Small Spaces Picks
- Best KVM Switches for Two Computers and One Desk Setup
- Best Monitor Light Bars for Eye-Friendly Desk Lighting
- Best PC Desk Shelves for Monitors, Gear and Storage
- Best Graphics Cards for 1440p Gaming PCs in 2026 Guide
- Best PC Tool Kits for Building, Upgrading and Repairs


