Key takeaways
- Find the best PC DisplayPort cables for 4K and 8K monitors, high refresh rates, and clean desk setups, with VESA-certified picks for every budget.
A DisplayPort cable is one of the smallest purchases in a PC setup, yet it decides whether a monitor can actually run at the resolution and refresh rate printed on its box. A cable with too little bandwidth quietly caps a high-refresh display at a lower mode, while a cable that matches the monitor lets the graphics card and screen work without a bottleneck in between. For most desktop PCs, a short DisplayPort to DisplayPort cable is the right link between graphics card and monitor.
The five cables below cover the realistic range of desktop setups, from a standard 4K office monitor to a high-refresh gaming display and a future-facing rig built around the newest graphics cards. Two are DisplayPort 2.1 cables with the highest bandwidth tier available in a passive cable, and three are DisplayPort 1.4 cables that cover the resolutions and refresh rates most monitors in use today can actually display.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most PC owners, a VESA-certified DisplayPort 1.4 cable rated at 32.4 gigabits per second is the right buy, because it supports 8K at 60 hertz, 4K at high refresh rates, HDR, and adaptive sync on the monitors most people own. Owners of very high-refresh 4K monitors, or graphics cards with DisplayPort 2.1 outputs, should step up to a VESA-certified DP80 cable rated at 80 gigabits per second.
Table of Contents
- Quick Answer
- How to Choose
- 1. Cable Matters 2.1
- 2. Ivanky 1.4
- 3. Amazon Basics 1.4
- 4. Ugreen 1.4
- 5. StarTech.com 2.1
- Who Should Skip
- FAQ
- Final Verdict
- Product and ASIN Reference
How to Choose a DisplayPort Cable
Start with the monitor, not the cable. Check the highest resolution and refresh rate the monitor supports over DisplayPort, then check the graphics card output, and buy a cable whose bandwidth covers that combination. DisplayPort 1.4 tops out at 32.4 gigabits per second, which covers 4K at 120 hertz and above in many configurations and 8K at 60 hertz, often with Display Stream Compression doing part of the work at the highest modes. DisplayPort 2.1 cables in the DP80 tier reach 80 gigabits per second and suit the newest high-refresh 4K and 8K displays.
Certification matters more than the version number on the packaging. A VESA certification means the cable was tested against the standard it claims, and it applies to a specific model and length, so the exact variant matters. Measure the route from graphics card to monitor, then buy the shortest length that reaches with a little slack. DisplayPort plugs have a locking latch, and the release button must be pressed before pulling the plug out, or the socket can be damaged.
1. Cable Matters DisplayPort 2.1 Cable, 6.6 Feet
The Cable Matters DisplayPort 2.1 cable is the premium pick in this roundup and the one to buy when the monitor and graphics card are both new enough to use the extra headroom. It is VESA certified to the DP80 tier, which means it is rated for up to 80 gigabits per second, and the manufacturer lists support for 16K at 60 hertz, 8K at 240 hertz, and 4K at 240 hertz. Those headline modes depend on the display and graphics card as well as the cable, but the bandwidth rating itself is the point.
At 6.6 feet, or two metres, it is long enough for a tower that sits on the floor beside the desk, or on a desk shelf to one side of the monitor. The cable is backward compatible with DisplayPort 2.0, 1.4, and 1.2 devices, so it also works with an older monitor or graphics card, simply running at whatever the slower end supports. FreeSync, G-Sync, and HDR support are listed, which covers the adaptive sync and high dynamic range features that matter most to gamers and to anyone editing video on a capable display. This is a premium-priced cable, and it is more cable than a standard 4K office monitor needs.
Specs
| Specification | Detail |
|---|---|
| DisplayPort version | 2.1 |
| Bandwidth | Up to 80 gigabits per second |
| VESA certification | DP80 certified |
| Length | 6.6 feet |
| Max resolution listed | 16K at 60 hertz, 8K at 240 hertz, 4K at 240 hertz |
| Adaptive sync | FreeSync and G-Sync listed |
| HDR support | Listed |
| Backward compatibility | DisplayPort 2.0, 1.4, and 1.2 |
2. Ivanky VESA Certified DisplayPort 1.4 Cable, 6.6 Feet
The Ivanky cable is the mid-range all-rounder of this roundup, and it is the best fit for the large group of PC owners whose monitors top out at 4K with a high refresh rate or at 1440p with a very high refresh rate. It is VESA certified, it carries the full 32.4 gigabits per second bandwidth of DisplayPort 1.4, and its listed modes run up to 8K at 60 hertz, 4K at 144 hertz, and 2K at 240 hertz. Those figures cover the great majority of gaming monitors in use today, including popular 1440p high-refresh screens.
The braided jacket protects the cable from scuffs when it is pulled through a desk grommet or around a monitor arm, and it helps the cable keep its shape rather than kinking behind the screen. The listing states that the cable is for DisplayPort to DisplayPort connections only, and that it is not compatible with HDMI or Mini DisplayPort. Backward compatibility with DisplayPort 1.3, 1.2, and earlier versions is listed, and HDR and HDCP 2.2 support are listed, along with FreeSync and G-Sync.
Specs
| Specification | Detail |
|---|---|
| DisplayPort version | 1.4 |
| Bandwidth | Up to 32.4 gigabits per second |
| VESA certification | VESA certified |
| Length | 6.6 feet |
| Max resolution listed | 8K at 60 hertz, 4K at 144 hertz, 2K at 240 hertz |
| Jacket | Braided |
| Adaptive sync | FreeSync and G-Sync listed |
| HDR support | Listed, with HDCP 2.2 |
| Backward compatibility | DisplayPort 1.3, 1.2, and earlier |
3. Amazon Basics DisplayPort 1.4 Cable, 6 Feet
The Amazon Basics cable is the budget pick, and it is the right choice when the goal is a straightforward, no-frills link between a PC and a standard monitor. It is a DisplayPort 1.4 cable rated at 32.4 gigabits per second, with listed support for 8K at 60 hertz and 4K at 120 hertz, plus dynamic HDR and 3D. Those figures match the needs of a 4K office monitor, a 1440p gaming monitor, and a 1080p high-refresh display, which together cover most desks.
There is no VESA certification claim in the listing for this cable, which is the main difference from the mid-range picks above. In practice, that means the buyer is relying on the stated specification rather than an independent certification, and the cable is best matched to monitors at or below 4K at 120 hertz, where DisplayPort 1.4 has comfortable headroom. Gold-plated plugs are listed, and the six-foot length suits a tower beside the desk or a monitor arm with a short cable run. The plain black jacket is light and flexible, which makes it easy to route through a cable tray or behind a monitor stand.
Specs
| Specification | Detail |
|---|---|
| DisplayPort version | 1.4 |
| Bandwidth | Up to 32.4 gigabits per second |
| VESA certification | Not stated |
| Length | 6 feet |
| Max resolution listed | 8K at 60 hertz, 4K at 120 hertz |
| HDR support | Dynamic HDR listed, plus 3D |
| Plugs | Gold-plated |
| Backward compatibility | Not stated |
4. Ugreen VESA Certified DisplayPort 1.4 Cable, 6.6 Feet
The Ugreen cable is the second VESA-certified DisplayPort 1.4 option in this roundup, and it stands out for the refresh rates it lists at 4K. Where most DisplayPort 1.4 cables in this group list 4K at 120 or 144 hertz, the Ugreen listing states 4K at 240 hertz, alongside 8K at 60 hertz and 2K at 165 hertz, all at the standard 32.4 gigabits per second bandwidth of DisplayPort 1.4. The higher 4K refresh figure depends on Display Stream Compression and on a monitor and graphics card that support it, so buyers should treat it as a best-case mode rather than a guarantee for every display.
The conductor material is listed as 26 AWG tinned copper, and the connectors are 20-pin DisplayPort male plugs on both ends, which is the standard full-size DisplayPort arrangement. Backward compatibility with DisplayPort 1.3 and 1.2 is listed, and the cable supports FreeSync, G-Sync, and HDR, so adaptive sync gaming and high dynamic range video are covered. Colour format support for BT601, BT709, BT2020, and Adobe RGB is listed, which matters most to photo and video work. One point to note is that the indexed Amazon listing for this cable showed no featured offers available at the time of checking, so buyers should confirm availability before ordering.
Specs
| Specification | Detail |
|---|---|
| DisplayPort version | 1.4 |
| Bandwidth | Up to 32.4 gigabits per second |
| VESA certification | VESA certified |
| Length | 6.6 feet |
| Max resolution listed | 8K at 60 hertz, 4K at 240 hertz, 2K at 165 hertz |
| Conductor | 26 AWG tinned copper |
| Adaptive sync | FreeSync and G-Sync listed |
| HDR support | Listed |
| Backward compatibility | DisplayPort 1.3 and 1.2 |
5. StarTech.com DisplayPort 2.1 Cable, 3 Feet
The StarTech.com cable is the short, premium option for a tidy desk where the PC sits close to the monitor. At three feet long, it avoids the coil of spare cable that a six-foot lead leaves behind a monitor arm or a small desk, and a short passive run is also the easiest length to certify at the highest bandwidth. It is VESA certified to the DP80 tier, rated for UHBR20 and 80 gigabits per second, with listed support for 16K and 8K at 60 hertz, HDR, Display Stream Compression 1.2a, and HDCP 2.2.
Backward compatibility with DisplayPort 2.0, 1.4, and 1.2 is listed, so the cable works with older hardware as well, running at whatever the slower end supports. That makes it a reasonable buy even before a monitor upgrade: it can serve a current 1440p or 4K display today, then carry the full bandwidth of a future high-refresh monitor without being replaced. The three-foot length is the limitation to weigh carefully, because it will not reach a tower on the floor, and it may not reach around a large monitor stand if the PC sits to one side.
Specs
| Specification | Detail |
|---|---|
| DisplayPort version | 2.1 |
| Bandwidth | Up to 80 gigabits per second |
| VESA certification | DP80 certified |
| Length | 3 feet |
| Max resolution listed | 16K and 8K at 60 hertz |
| Link rate | UHBR20 |
| HDR support | Listed, with DSC 1.2a and HDCP 2.2 |
| Backward compatibility | DisplayPort 2.0, 1.4, and 1.2 |
Who Should Skip a DisplayPort Cable
A DisplayPort cable is the wrong purchase when either end of the link has no full-size DisplayPort socket. Many laptops have only USB-C or HDMI outputs, and many televisions have only HDMI inputs, so a passive DisplayPort to DisplayPort cable cannot connect them. In those cases the right product is a cable or adapter built for that exact conversion, such as a USB-C to DisplayPort cable for a laptop, or a DisplayPort to HDMI cable for a television, and the direction of the conversion matters. Owners of 1080p monitors at 60 hertz also gain nothing from a premium cable, since any DisplayPort cable that meets the standard will carry that signal.
Frequently Asked Questions
Is DisplayPort better than HDMI for a PC monitor?
For most PC monitors, yes, because DisplayPort was designed for computer displays and carries adaptive sync as part of the standard, along with high refresh rates and multi-stream transport for daisy-chained monitors. HDMI is the better choice for televisions and for devices that only have HDMI sockets, but when both the graphics card and the monitor have DisplayPort sockets, a DisplayPort cable is usually the simplest way to get the monitor’s best mode.
Do I need a DisplayPort 2.1 cable for a 4K 144 hertz monitor?
No, a VESA-certified DisplayPort 1.4 cable is enough for most 4K monitors at 144 hertz, because DisplayPort 1.4 provides 32.4 gigabits per second and supports that mode, often with Display Stream Compression. A DisplayPort 2.1 cable becomes worth buying for very high-refresh 4K monitors, for 8K displays, or for a new graphics card with DisplayPort 2.1 outputs.
Does cable length affect DisplayPort performance?
Yes, longer passive cables are harder to run at full bandwidth, which is why the highest certification tiers are usually found on cables of two metres or less. A six-foot cable is a safe length for most desks, and a three-foot cable is the neatest option when the PC sits close to the monitor. Runs much longer than two metres at high bandwidth generally need an active cable.
Why does my monitor still show a low refresh rate with a new cable?
The usual causes are the monitor settings, the graphics card settings, or a port that does not support the wanted mode. Check that the monitor’s on-screen menu has its highest refresh rate enabled, that the operating system display settings list the wanted mode, and that the cable is plugged into the graphics card rather than the motherboard video output.
Final Verdict
The best PC DisplayPort cable for most owners is a VESA-certified DisplayPort 1.4 cable at 32.4 gigabits per second, and the Ivanky braided cable is the strongest all-round choice in that group, with the Ugreen cable close behind for buyers who want the highest listed 4K refresh rate. The Amazon Basics cable covers standard 4K and office setups at a budget grouping, while the two DP80 cables from Cable Matters and StarTech.com suit new high-refresh displays and future-facing builds, with the choice between them coming down to length.
Further reading
- Best PC HDMI Cables for 4K Gaming and Work Monitors
- Best PC Ethernet Cables for Fast Wired Gaming and Work
- Best Ethernet Cables for Gaming and Fast Home Networks
- How to Choose a Gaming Monitor: Size, Speed and Panels
- Best PC Power Supply Testers for Quick, Safe PSU Checks
- Best PC Keyboard Wrist Rests for Comfortable Typing




