Updated Nov 19, 2026· 10 min read

Key takeaways

  • Find the best PC cable management trays for tidy PC setups. Compare clamp, screw and fabric trays by size, mounting, load capacity and desk fit.

The best PC cable management trays are under-desk trays that hold a power strip, its adapters and the slack from monitor, PC and peripheral cables in one hidden channel, so the floor stays clear and cables stay away from feet and chair casters. For most PC setups, a clamp-mounted steel tray is the most practical starting point because it needs no drilling, holds a full power strip, and can be moved when the desk layout changes.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

At a Glance

Product Best For Mounting Length
Vivo Under Desk Cable Management Trays, 2 Pack Permanent wood desks with two cable zones Screw mount 16.5 inches per tray
Reflying Steel Under Desk Cable Management Tray Wide power strips without drilling Clamp mount 15.7 inches
Yecaye All-Metal Clamp-Mount Cable Management Tray Standing desks and rented desks Clamp mount 14.17 inches
Pyle 48 Inch Under Desk Cable Management Tray Wide desks and large workstations Clamp or screw mount 48 inches
Univivi 36 Inch Under Desk Cable Management Tray Long, low-profile fabric storage Clamp or screw mount 36 inches

1. Vivo Under Desk Cable Management Trays, 2 Pack

Check price on Amazon

The Vivo two-pack supplies two separate steel trays instead of one long basket. That split layout works well when a power strip belongs near the wall feed at one end of the desk while a monitor power brick, a dock power supply or a USB hub belongs nearer the PC at the other end. Each tray is a low-profile channel that sits close to the underside of the desktop, while the open front makes it easy to add, remove or swap a cable without taking the tray down.

Specs

Specification Details
Brand Vivo
Quantity 2 trays
Material Metal
Dimensions per tray 16.5 x 3 x 4.5 inches
Mounting-hole spacing 11 inches
Mounting method Screw mount
Load capacity 11 pounds per tray
Colour Black

2. Reflying Steel Under Desk Cable Management Tray

Check price on Amazon

The Reflying tray is a single steel tray with a clamp mount, and it is one of the simplest ways to hide a power strip without drilling into a desk. The tray grips the desk edge with a clamp instead of adhesive or permanent screws, so it can be fitted in a few minutes and moved later if the desk is rearranged. That no-drill approach suits rented desks, glass desks and standing desks, and it also suits a PC owner who wants to try under-desk storage before committing to a permanent installation.

At 15.7 inches long and 6.3 inches wide, this tray is noticeably wider than the slim screw-mounted trays in this guide. The extra width matters because many power strips are wider than a narrow channel, and a wide tray gives wall adapters room to sit side by side instead of stacking on top of each other.

Specs

Specification Details
Brand Reflying
Quantity 1 tray
Material Steel
Dimensions 15.7 inches long, 6.3 inches wide
Mounting method Clamp mount, no drilling
Load capacity Not stated on the product page summary
Colour Black

3. Yecaye All-Metal Clamp-Mount Cable Management Tray

Check price on Amazon

The Yecaye tray is an all-metal clamp-mount tray for a compact PC setup where the desk is moved up and down or the owner does not want to drill. Its clamp fits desks from 0.2 inches to 1.85 inches thick, which covers most standard office desks, gaming desks and standing desks, and the non-slip pads on the clamp are intended to protect the desktop surface from marks.

The tray measures 14.17 inches long and 4.53 inches wide, so it suits a single power strip and the cables for one PC, one or two monitors and a few peripherals, rather than a wide workstation with several strips. Hook-and-loop straps are included, and they can secure a router, a hub or a bundle of cables inside the tray.

Specs

Specification Details
Brand Yecaye
Quantity 1 tray
Material Metal
Dimensions 14.17 x 4.53 inches
Mounting method Clamp mount, no drilling
Desk thickness range 0.2 to 1.85 inches
Included accessories Hook-and-loop straps
Colour Black

4. Pyle 48 Inch Under Desk Cable Management Tray

Check price on Amazon

The Pyle tray is the longest option in this guide, at 48 inches, and it is built for a large workstation where a single short tray would leave cables hanging at the ends. A 48-inch run can hold a long power strip, several adapters and the slack from a multi-monitor setup in one continuous channel, which keeps the whole width of the desk clear underneath.

The tray measures 48 inches long and 5.35 inches wide, with a stated load capacity of 20 pounds. Built-in ties are included, and they help group cables inside the tray so a monitor cable, a PC power cable and a USB cable do not tangle when one of them is pulled out for replacement. Mounting can be done with clamps or with screws, giving a choice between a no-drill fit and a permanent fit.

Specs

Specification Details
Brand Pyle
Quantity 1 tray
Material Fabric
Dimensions 48 x 5.35 inches
Mounting method Clamp mount or screw mount
Load capacity 20 pounds
Colour Black
Included accessories Built-in ties

5. Univivi 36 Inch Under Desk Cable Management Tray

Check price on Amazon

The Univivi tray is a 36-inch fabric tray that sits between the compact steel trays and the 48-inch Pyle tray in length. At 36 inches, it covers most of the width of a standard PC desk without reaching the full span, which makes it a good match for a two-monitor setup with a single long power strip.

The tray measures 36 inches long and 5.5 inches wide, and the listed item weight is 2.51 pounds. The 5.5-inch width gives room for a standard power strip plus a row of adapters, and the fabric sides flex slightly around a bulky brick rather than forcing it into a rigid slot. The tray mounts with clamps or with screws, so the owner can choose a no-drill fit for a rented desk or a screw fit for a permanent installation.

Specs

Specification Details
Brand Univivi
Quantity 1 tray
Material Fabric
Dimensions 36 x 5.5 inches
Mounting method Clamp mount or screw mount
Item weight 2.51 pounds
Colour Black

How to Choose a PC Cable Management Tray

Start with the desk, not the tray. Measure the thickness of the desktop, the length of the clear space under the desk, and the width of the widest power adapter. Then check the underside for drawers, frame members, modesty panels and monitor-arm clamps, because any of those can block a tray or a clamp. Next, count the cables that need to live in the tray: a basic PC setup has a PC power cable, one or two monitor power cables, a signal cable for each display, and cables for a keyboard, a mouse, a headset and speakers. Group cables by function before choosing a length, and put power cables and adapters in the tray while short peripheral cables run through a clip or a sleeve on the desk surface. Leave space between adapters so warm air can escape. A tray does not provide surge protection or overload protection, so the power strip inside it still needs its own protection features.

Tray Length, Width and Load Capacity

Length decides how much of the desk the tray can serve. A 14-inch or 16-inch tray suits a single power strip and a compact setup. A 36-inch tray suits a standard desk with two monitors and a long strip. A 48-inch tray suits a wide desk or a workstation with several powered devices. Longer is not always better: a tray longer than the clear space under the desk will overhang. Width decides whether the strip and its adapters fit side by side. Slim trays around 3 inches wide suit slim strips and standard adapters, but they can reject a wide surge protector. Trays around 5 to 6 inches wide suit wider strips and larger bricks. Load capacity is stated per tray on the product page. A capacity of 11 pounds per tray covers a typical strip and several adapters, while 20 pounds covers a longer strip and a heavier set of bricks. If the stated capacity is not listed, treat the tray as suitable for a light load only.

Mounting Methods Compared

Clamp mounting grips the desk edge and needs no tools beyond the clamp itself. It suits desks up to the thickness range stated for the clamp, and it can be removed without leaving holes. Its limits are desk-edge shape and the presence of an apron or frame member near the edge. Screw mounting fixes the tray to the underside of a wood or particle-board desktop. It gives a firm, permanent hold and does not depend on edge thickness, but it needs solid material and the correct screw depth. It is not suitable for glass, for a very thin top, or for a desk where drilling is not allowed. Adhesive mounting uses tape or pads to hold a light tray to a smooth surface. It needs no drilling and leaves no holes, but it depends on a clean, flat surface and a curing period before loading, and it suits light cable channels rather than a heavy tray full of adapters.

Cable Routing for a PC Setup

Run the single feed from the wall to the power strip in the tray, then run each device cable from the strip to its device with just enough slack to reach without pulling tight. Leave a small loop of slack inside the tray for each cable that may need to move, such as a monitor cable on an adjustable arm or a cable on a standing desk. Separate power cables from signal cables where the layout allows it. A two-pack makes that separation easy, with power in one tray and display and USB cables in the other. With a single tray, keep the power strip at one end and the signal cables at the other, and use hook-and-loop ties to group cables by function. Label the cables at the tray end if the setup has more than a few devices, and remove an old cable when a device is replaced.

Frequently Asked Questions

What size cable management tray do I need for a PC setup?

Measure the power strip first, then measure the widest adapter. A tray should be at least as long as the strip, and at least as wide as the widest adapter that must sit inside it. For a single strip and one or two monitors, a tray around 15 to 17 inches long is often enough. For a standard desk with a long strip, a 36-inch tray is a practical choice.

Can a cable management tray hold a power strip?

Yes, holding a power strip is the main purpose of most under-desk trays, provided the strip fits the tray length and width and the total weight stays within the stated load capacity. Place the strip flat inside the tray and leave space around the adapters for airflow. A tray does not add surge protection, so the strip itself should provide the protection features needed for the setup.

Do I need to drill holes to install a cable management tray?

No, drilling is not always needed. Clamp-mounted trays grip the desk edge without drilling, and some trays also offer a screw option for a permanent fit. Screw-mounted trays do need drilling into a wood or particle-board desktop, and they are not suitable for glass desks or rented desks where drilling is not allowed.

How do I keep cables from falling out of an under-desk tray?

Use the ties or straps supplied with the tray to group cables inside the channel, and route each cable into the tray with a small amount of slack rather than a tight pull. Keep heavier adapters at the bottom of the tray and lighter cables above them, and check the tray after moving the desk or adding a device.

Conclusion

The best PC cable management tray for a given setup is the one that matches the desk, the power strip and the cable count, rather than the longest or the widest tray on the page. A clamp-mounted steel tray suits most PC owners who want a firm, no-drill result, a screw-mounted two-pack suits a permanent wood desk with two cable zones, and a long fabric tray suits a wide desk with a long strip and several adapters. Measure the desk edge, the strip and the widest adapter before ordering.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best PC Cable Management Trays for a Tidy…Check price on Amazon