Key takeaways
- Find the best HDMI adapters for PC in this guide. Compare USB-C to HDMI, DisplayPort to HDMI, HDMI to VGA, and HDMI switches for work and gaming.
The best HDMI adapter for most PC users is the Anker 310 USB-C to HDMI Adapter, because it turns a USB-C port with video output into a full HDMI output at up to 4K at 60Hz, with no driver install and no extra power supply. If your desktop graphics card has a spare DisplayPort output instead, the Cable Matters Active DisplayPort to HDMI Adapter is the stronger pick, while the Benfei HDMI to VGA Adapter is the right choice for connecting a PC to an older VGA monitor or projector.
HDMI adapters solve a simple problem: the port on your PC and the port on your display do not match. The fix depends on the direction of the signal, the resolution and refresh rate you want, and whether you need audio as well as video. A USB-C to HDMI adapter, a DisplayPort to HDMI adapter, and an HDMI to VGA adapter all look similar, but they are not interchangeable, and buying the wrong direction is the most common mistake.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose an HDMI Adapter for Your PC
- Anker 310 USB-C to HDMI Adapter
- Cable Matters Active DisplayPort to HDMI Adapter
- Benfei HDMI to VGA Adapter
- Anker HDMI Switch, 4-in-1
- Plugable USB-C to HDMI Adapter
- FAQ
- Conclusion
How to Choose an HDMI Adapter for Your PC
Start by identifying the port on your PC and the port on your display, then match the adapter to that exact direction. An adapter labelled USB-C to HDMI sends video from a USB-C port to an HDMI display, and it does not work in reverse. The same rule applies to DisplayPort to HDMI and HDMI to VGA adapters. Check the product listing for the words unidirectional or one-way if the direction is not obvious.
Next, check the resolution and refresh rate. An adapter rated for 4K at 60Hz suits a 4K monitor used for work, video, and most games, while an adapter limited to 4K at 30Hz can feel sluggish when moving the mouse or scrolling. The adapter, the cable, the graphics hardware, and the display must all support the mode you want, so the lowest-rated link in the chain sets the limit.
Audio matters more than many buyers expect. Most HDMI adapters carry audio alongside video, which lets sound reach a monitor with built-in speakers or a television. VGA carries no audio at all, so an HDMI to VGA adapter either needs a separate audio connection or an audio jack built into the adapter.
Power and drivers are the final checks. Simple adapters draw power from the port and need no driver, which makes them easy to move between machines. Active adapters and graphics adapters that add a display through a USB port may need a driver, especially on Windows.
Anker 310 USB-C to HDMI Adapter
The Anker 310 USB-C to HDMI Adapter is the best all-round pick for laptop and desktop PCs with a USB-C port that supports video output. It connects a USB-C or Thunderbolt 3 port to an HDMI display and supports resolutions up to 4K at 60Hz, including 4K at 30Hz, 1440p at 60Hz, and 1080p at 60Hz.
Setup is plug-and-play on a compatible port, with no driver to install and no external power supply to find. The adapter is small enough to carry in a laptop bag, which makes it a practical choice for a PC that moves between a desk, a meeting room, and a home television.
The one requirement to confirm is that the USB-C port on your PC supports video output through DisplayPort Alt Mode or Thunderbolt 3. A USB-C port that only handles data or charging will not produce a picture through this adapter. Check the manual or specification page for your laptop or motherboard before ordering. If the port supports video, this adapter is the simplest way to add an HDMI display.
Specs
| Specification | Details |
|---|---|
| Input | USB-C |
| Output | HDMI |
| Maximum resolution | 4K at 60Hz |
| Other supported resolutions | 4K at 30Hz, 1440p at 60Hz, 1080p at 60Hz |
| Compatibility | USB-C ports with video output, Thunderbolt 3 ports |
| Power | Bus-powered, no external supply |
| Audio | Audio carried over HDMI |
| Best for | Laptops and PCs adding one HDMI display |
Cable Matters Active DisplayPort to HDMI Adapter
The Cable Matters Active DisplayPort to HDMI Adapter is the best pick for a desktop PC whose graphics card has a free DisplayPort output and a monitor or television with only HDMI inputs. It is an active adapter, which means it converts the DisplayPort signal rather than relying on the graphics card to output an HDMI signal. That distinction matters, because many graphics cards need an active adapter when several displays are connected at once.
According to the manufacturer listing, the adapter supports 4K resolution at 60Hz, along with 1440p at 144Hz and 4K at 240Hz modes on compatible equipment, and it carries audio over HDMI. It also supports AMD Eyefinity multi-display technology, which suits a desktop with two or three monitors driven from one graphics card.
This is a premium option for a fixed desktop setup rather than a travel adapter. It fits a PC used for gaming, video editing, or a multi-monitor workstation where the graphics card has DisplayPort outputs to spare and the display has none.
Specs
| Specification | Details |
|---|---|
| Input | DisplayPort |
| Output | HDMI |
| Maximum resolution | 4K at 60Hz |
| Other supported resolutions | 1440p at 144Hz, 4K at 240Hz on compatible equipment |
| Adapter type | Active signal conversion |
| Multi-display support | AMD Eyefinity multi-display technology |
| Audio | Audio carried over HDMI |
| Best for | Desktop graphics cards connecting to HDMI displays |
Benfei HDMI to VGA Adapter
The Benfei HDMI to VGA Adapter is the best budget pick for connecting a modern PC to an older VGA monitor or projector. Many offices, schools, and meeting rooms still use VGA projectors, and many older monitors have no digital input at all. This adapter bridges that gap by converting the digital HDMI signal from a PC into an analogue VGA signal, using a built-in chip to handle the conversion.
Direction is the key point with this adapter. It converts HDMI to VGA only, and it cannot convert a VGA output into an HDMI input. That one-way design is normal for this type of adapter, but it catches out buyers who assume any adapter works in both directions. It supports resolutions up to 1080p, which matches most VGA monitors and projectors still in use, and because VGA carries no audio, the version with a 3.5mm audio jack is worth choosing when the display has speakers.
Specs
| Specification | Details |
|---|---|
| Input | HDMI, male connector |
| Output | VGA, female connector |
| Maximum resolution | 1080p |
| Conversion | Built-in chip converts digital HDMI to analogue VGA |
| Direction | HDMI to VGA only, not reversible |
| Connectors | Gold-plated HDMI and VGA connectors |
| Audio | VGA carries no audio; choose the version with a 3.5mm audio jack if audio is needed |
| Best for | Older VGA monitors and projectors |
Anker HDMI Switch, 4-in-1
The Anker HDMI Switch is the best pick for a PC setup that shares one monitor or television with several HDMI devices. It has four HDMI inputs and one HDMI output, so a desktop PC, a games console, a streaming device, and a laptop can all stay connected to a single display, with switching handled by the included remote control or the button on the unit. That saves the wear and frustration of swapping cables behind a desk or a television.
The switch supports 4K resolution at 60Hz, along with HDR, 3D, and Dolby and DTS audio pass-through, according to the manufacturer listing. For the best picture, the listing recommends input and output HDMI cables of up to 5 metres each. It suits a desk where a work PC and a personal device take turns on the same monitor, or a living room where a PC and several media devices share one television.
Two limits are worth noting. The switch is not compatible with ARC and eARC audio return channels, and it is not compatible with DVI to HDMI cables. It also needs a power supply for the remote control, with batteries and a charger not included in the box.
Specs
| Specification | Details |
|---|---|
| Inputs | 4 HDMI ports |
| Output | 1 HDMI port |
| Maximum resolution | 4K at 60Hz |
| Video features | HDR, 3D pass-through |
| Audio features | Dolby and DTS pass-through |
| Switching | Remote control or button on the unit |
| Cable guidance | Input and output cables up to 5 metres each for best results |
| Limitations | Not compatible with ARC and eARC; not compatible with DVI to HDMI cables |
| Best for | Sharing one display between a PC and other HDMI devices |
Plugable USB-C to HDMI Adapter
The Plugable USB-C to HDMI Adapter is the best pick for a PC that has no spare video output at all. Unlike a simple port converter, it works as a universal video graphics adapter over USB 3.0 and USB-C, adding an HDMI monitor to a Windows or Mac computer through a standard USB port.
The adapter supports resolutions up to 1440p at 60Hz, along with 1080p at 60Hz and lower resolutions. The 1440p ceiling makes it a mid-range option rather than a 4K adapter, but it is a good match for a 1080p or 1440p office monitor used for documents, browsing, video calls, and general multitasking.
Because this adapter adds a display through USB rather than converting a native video port, it uses a driver and the host processor to drive the extra screen. That approach works well for office and productivity use, but it is not the right choice for high-refresh-rate gaming on the added display.
Specs
| Specification | Details |
|---|---|
| Input | USB 3.0 or USB-C |
| Output | HDMI |
| Maximum resolution | 1440p at 60Hz |
| Other supported resolutions | 1080p at 60Hz and lower |
| Adapter type | USB graphics adapter, adds a display through a USB port |
| Operating systems | Windows and Mac |
| Power | Bus-powered, no external supply |
| Best for | Adding an extra monitor when no video port is free |
How the Picks Compare
The five adapters in this guide cover different problems, so the right choice depends on the ports you already have. The Anker 310 is the simplest choice for a USB-C laptop or desktop with video output, while the Plugable adapter is the answer when no video port is free at all. The Cable Matters active adapter suits a desktop graphics card with spare DisplayPort outputs, and the Benfei adapter is the budget fix for an older VGA display. The Anker HDMI switch solves a different problem entirely: too many HDMI devices and too few HDMI inputs on one display.
Budget, mid-range, and premium groupings help narrow the choice. The Benfei adapter sits in the budget group and does one job well. The Anker 310 and the Plugable adapter sit in the mid-range group, covering the two most common laptop and desktop situations. The Cable Matters adapter and the Anker HDMI switch sit in the premium group, for multi-monitor desktops and shared-display setups.
FAQ
Do HDMI adapters reduce picture quality?
A good adapter that supports the resolution and refresh rate of your display does not reduce picture quality in normal use. The picture is limited by the lowest-rated part of the chain, which can be the adapter, the cable, the graphics hardware, or the display itself. If the image looks soft or flickers, check that the adapter supports the mode you selected and try a shorter, good-quality HDMI cable before replacing the adapter.
Can I use a USB-C to HDMI adapter on any PC?
No. A USB-C to HDMI adapter only works when the USB-C port supports video output through DisplayPort Alt Mode or Thunderbolt. A USB-C port that handles data or charging only will not produce a picture. Check the specification page or manual for your laptop or motherboard to confirm video support.
What is the difference between an HDMI switch and an HDMI splitter?
An HDMI switch connects several HDMI sources to one display and lets you choose which source appears on screen. An HDMI splitter does the opposite: it takes one HDMI source and sends the same picture to two or more displays at the same time. For a PC shared with a console on one monitor, you need a switch. For one PC shown on two screens at once, you need a splitter.
Why does my HDMI to VGA adapter show no picture?
The most common cause is the wrong direction, since HDMI to VGA adapters work one way only and cannot convert a VGA output into an HDMI input. Other causes include a display set to the wrong input and a resolution higher than the adapter or the VGA display supports. Lower the output resolution to 1080p and confirm the display input is set to VGA.
Conclusion
The best HDMI adapter for a PC is the one that matches the ports you have and the display you want to use. For most laptop users, the Anker 310 USB-C to HDMI Adapter is the simplest and most versatile choice, with 4K at 60Hz support and no driver to install. Desktop users with a spare DisplayPort output should choose the Cable Matters Active DisplayPort to HDMI Adapter, while anyone connecting an older VGA monitor or projector should pick the Benfei HDMI to VGA Adapter. The Plugable USB-C to HDMI Adapter adds a screen when no video port is free, and the Anker HDMI Switch keeps several HDMI devices connected to a single display.
|—|—|
Further reading