Key takeaways
- Find the best microphone boom arms for podcasting, streaming, and recording. Compare reach, load capacity, mounting, and cable management before you buy.
The best microphone boom arms lift the microphone off the desk, bring it close to your mouth, and hold it steady while you record, stream, or call. The best overall choice is the Rode PSA1+, because it combines quiet spring-damped movement, long reach, and a useful load range for podcast and broadcast microphones. For a low-profile arm that stays out of the camera frame, choose the Elgato Wave Mic Arm LP. For a heavier microphone at a mid-range position, the Samson MBA28 offers long reach and a generous load capacity. Budget buyers should look first at the TONOR T20 and the NEEWER scissor arm, both of which cover the basics for lighter USB and handheld microphones.
Table of Contents
- How to Choose a Microphone Boom Arm
- Rode PSA1+
- Elgato Wave Mic Arm LP
- Samson MBA28
- TONOR T20
- NEEWER Microphone Arm Stand
- Frequently Asked Questions
- Conclusion
How to Choose a Microphone Boom Arm
Start with load capacity. Add the weight of the microphone, the shock mount, the pop filter, and the cable that hangs from the arm. If that total sits close to the arm’s maximum, the arm may sag or drift. If the total sits below a published minimum, where one is given, the arm may rise on its own. Choose an arm whose published range covers your complete setup with room to spare.
Reach is the next check. Horizontal reach decides whether the microphone can sit in front of you without the base crowding your keyboard or monitor. Vertical reach decides whether the arm can lift the microphone clear of a large monitor or drop it low enough for a seated speaker. Measure from the clamp position to your mouth, and allow extra length for the microphone to sit slightly in front of you.
Mounting comes third. Most arms in this guide use a desk clamp, which suits rented desks and shared workspaces because it leaves no holes. Some also include a threaded desk insert or a flange mount for a more permanent installation. Check the maximum desk thickness for the clamp, and check whether your desk has a lip, a modesty panel, or a cable tray that could block it.
Thread size is easy to overlook. Many microphone mounts use a 3/8-inch or 5/8-inch thread, and many arms include an adapter for the other size. Confirm that the arm, the shock mount, and the microphone share a compatible thread, or that the required adapter is included.
Rode PSA1+
The Rode PSA1+ is the premium pick in this guide, and the arm to choose when the microphone, the recording quality, and daily use all matter. It is a professional studio arm for podcasters, streamers, and broadcasters, with a parallelogram spring design that keeps the microphone level as the arm moves. The springs are damped, which helps the arm move quietly and stay where you place it, an important detail when the microphone is live.
Reach is one of its strongest points. The published horizontal reach is 37 inches, and the published vertical reach is 34 inches, so the arm can pull a microphone across a wide desk, clear a monitor, or drop low for a seated speaker. That reach makes it a good fit for larger desks and dual-monitor setups.
The published microphone weight range is 0.2 to 2.7 pounds, or 94 grams to 1.2 kilograms. That range covers many popular USB condenser microphones, dynamic broadcast microphones, and lighter studio condensers, along with a shock mount and a pop filter, provided the total stays inside the range. ### Specs
| Feature | Detail |
|---|---|
| Horizontal reach | 37 inches |
| Vertical reach | 34 inches |
| Microphone weight range | 0.2 to 2.7 pounds |
| Mounting | Desk clamp and threaded desk insert |
| Thread adapter | 3/8-inch to 5/8-inch adapter included |
| Cable management | Integrated cable clips |
| Design | Parallelogram spring arm with damped springs |
| Best for | Podcasting, streaming, and broadcast use |
Elgato Wave Mic Arm LP
The Elgato Wave Mic Arm LP is the best low-profile choice in this guide. It is designed to sit below the shoulder line, so it stays out of the camera frame and keeps the desk looking clean on video. That shape suits streamers, video callers, and creators who record on camera, where a tall broadcast arm would block the view.
Despite the low shape, the arm is rated for microphones up to 2 kilograms, or 4.4 pounds, including accessories. That capacity covers many USB condenser microphones and dynamic microphones with a shock mount, and it gives the arm more headroom than many budget scissor arms. The all-metal construction supports that rating, and the arm rotates 360 degrees horizontally and 90 degrees upward, so the microphone can move from a recording position to a parked position without removing the arm.
Specs
| Feature | Detail |
|---|---|
| Maximum load | 2 kilograms, or 4.4 pounds, including accessories |
| Design | Low-profile arm that sits below the shoulder line |
| Rotation | 360 degrees horizontally, 90 degrees upward |
| Construction | All-metal build |
| Mounting | Padded desk clamp |
| Thread adapters | 1/4-inch, 3/8-inch, and 5/8-inch adapters included |
| Cable management | Magnetic cable channels |
| Best for | Streaming, video calls, and camera-facing recording |
Samson MBA28
The Samson MBA28 is the mid-range pick for heavier microphones and longer reach. It is a broadcast-style boom arm with a steel body and internal springs, designed for radio, podcast, and home studio use. Internal springs are a practical advantage for recording, because they allow quiet adjustment and keep the spring mechanism out of the way.
The headline specification is reach. The arm provides a maximum horizontal and vertical reach of 28 inches, which is enough to pull a microphone across a standard desk, around a keyboard, or in front of a speaker who sits back from the desk edge. That reach, combined with the load capacity below, makes the MBA28 a strong choice when a budget scissor arm would sag or run out of length.
Load capacity is the other reason to choose this arm. The published maximum is 5 pounds, or 2.3 kilograms, which covers heavier dynamic microphones, larger condenser microphones, and a shock mount with accessories. The thread is a standard 5/8-inch thread, so most studio microphone clips and shock mounts connect directly.
Specs
| Feature | Detail |
|---|---|
| Maximum reach | 28 inches, horizontal and vertical |
| Maximum load | 5 pounds, or 2.3 kilograms |
| Construction | Steel body with internal springs |
| Mounting | C-clamp mount and flange mount included |
| C-clamp maximum grip | 3 inches |
| Thread | 5/8-inch mic clip threading |
| Best for | Heavier microphones and home studios |
TONOR T20
The TONOR T20 is a budget scissor arm that covers the essentials for a first podcast or streaming setup. It is a suspension boom arm with a steel construction, a desk clamp, and two arm sections that fold and adjust to bring the microphone close to the speaker. It suits a light USB microphone, a handheld microphone in a clip, or a compact condenser microphone with a shock mount.
The published maximum load is 4 pounds, or 1.8 kilograms, which is generous for a budget arm and covers many popular USB microphones with a pop filter attached. The two arm sections measure 35 centimetres each, giving a useful reach across a standard desk. The arm folds for storage, which helps in a small room or a shared desk.
The box includes more accessories than many arms at this level. A pop filter, a foam cover, a microphone clip, a 3/8-inch to 5/8-inch adapter, and fabric cable ties are included, so a beginner can set up the microphone and tidy the cable without buying extra parts.
Specs
| Feature | Detail |
|---|---|
| Maximum load | 4 pounds, or 1.8 kilograms |
| Arm sections | Two sections, 35 centimetres each |
| Construction | Steel |
| Mounting | Desk clamp |
| Thread adapter | 3/8-inch to 5/8-inch adapter included |
| Included accessories | Pop filter, foam cover, mic clip, cable ties |
| Best for | Beginners and budget podcast setups |
NEEWER Microphone Arm Stand
The NEEWER Microphone Arm Stand is the other budget pick in this guide, and it suits a light microphone on a small desk. It is a suspension scissor arm with a desk clamp, a microphone clip, and a 3/8-inch to 5/8-inch adapter, and it folds for storage when it is not in use. The design is simple, the parts are easy to understand, and setup takes little time.
The published maximum load is 3.3 pounds, or 1.5 kilograms, which covers many USB condenser microphones used for streaming, calls, and voice recording. The microphone clip accepts a microphone shaft up to 1.26 inches in diameter, so check the diameter of your microphone or its mount first. The desk clamp fits desks up to 2 inches thick, which covers most standard desks and tables.
Movement is straightforward. The arm offers 360-degree rotation and 135-degree tilt, so the microphone can swing into position, tilt toward the speaker, and fold away afterward. Cable ties are included to keep the microphone cable close to the arm.
Specs
| Feature | Detail |
|---|---|
| Maximum load | 3.3 pounds, or 1.5 kilograms |
| Microphone clip diameter | Up to 1.26 inches |
| Desk clamp | Fits desks up to 2 inches thick |
| Rotation | 360 degrees |
| Tilt | 135 degrees |
| Construction | Steel |
| Thread adapter | 3/8-inch to 5/8-inch adapter included |
| Best for | Light USB microphones and small desks |
Frequently Asked Questions
What size boom arm do I need for a Blue Yeti?
A Blue Yeti is a heavier USB condenser microphone, so choose an arm whose published maximum load covers the microphone plus a shock mount and a pop filter. The Rode PSA1+, the Elgato Wave Mic Arm LP, and the Samson MBA28 all publish load capacities that cover that combination, while a budget scissor arm needs a careful weight check first.
Can a boom arm hold a Shure SM7B?
A Shure SM7B is a heavy dynamic microphone, and it usually needs a shock mount as well, so the combined weight matters more than the microphone alone. The Samson MBA28 publishes a 5-pound maximum, which covers the microphone and a typical mount, and the Elgato Wave Mic Arm LP publishes a 2-kilogram maximum, which also covers many SM7B setups. Check the weight of your exact mount and accessories first.
Do I need a shock mount with a boom arm?
A shock mount is not required for every setup, but it helps when the desk picks up vibration from typing, footsteps, or a bump. A shock mount suspends the microphone on elastic bands and reduces the vibration that reaches the microphone. It is most useful for condenser microphones and for desks that transmit sound easily. If you use one, add its weight to the microphone weight when you check the arm’s load capacity.
How do I stop a boom arm from sagging?
Sagging usually means the microphone and accessories weigh more than the arm is rated to hold, or the tension needs adjustment. First, check the published load capacity and the combined weight of the microphone, the shock mount, and the pop filter. If the total is inside the range, adjust the tension screws or knobs on the arm joints, following the maker’s instructions. If the total is above the range, choose an arm with a higher published capacity.
Conclusion
The best microphone boom arm is the one that matches your microphone weight, your desk, and the way you record. The Rode PSA1+ is the best overall choice for regular podcasting, streaming, and broadcast use, thanks to its quiet damped movement, its 37-inch horizontal reach, and its useful load range. The Elgato Wave Mic Arm LP is the best choice for camera-facing work, because its low profile stays out of the frame while still holding microphones up to 2 kilograms. The Samson MBA28 is the best mid-range choice for heavier microphones, with 28 inches of reach and a 5-pound load capacity. The TONOR T20 and the NEEWER Microphone Arm Stand are the best budget choices for lighter microphones and first setups, with the TONOR arm offering a higher load capacity and more included accessories.
Before you buy, weigh the microphone with its mount and accessories, measure the distance from the clamp to your mouth, and check the desk thickness and the thread size. Choose the arm that passes those checks with room to spare.
As an Amazon Associate, we earn from qualifying purchases.
|—|—|
Further reading