Key takeaways
- Discover the best PCIe SATA cards to add SATA ports for SSDs and hard drives. Compare four-port and six-port options for NAS, desktop, and server builds.
The best PCIe SATA cards add more SATA ports when a motherboard has run out of connections. For most buyers, a six-port PCIe 3.0 card with a modern controller is the strongest starting point, because it leaves room for extra hard drives and solid state drives. A four-port card is the better fit when only a few drives need to be added, when the case is compact, or when only a short PCIe x1 slot is free.
A PCIe SATA card fits into a PCIe slot and provides additional SATA III ports. Each port connects to one SATA hard drive or solid state drive with a standard SATA data cable. The card works alongside the motherboard storage controller, so drives connected to it appear in the operating system in the same way as drives connected directly to the motherboard, subject to driver and operating system support. All five cards here provide SATA III connections at up to 6 Gbps per port. They differ mainly in total bandwidth, port count, controller, and extras in the box.
Table of Contents
- How to Choose a PCIe SATA Card
- 1. StarTech 6-Port PCIe SATA Card
- 2. FebSmart 6-Port PCIe SATA Card
- 3. MZHOU 6-Port PCIe SATA Card
- 4. IO Crest 4-Port SATA III PCIe Card
- 5. GLOTRENDS 4-Port PCIe SATA Card
- Frequently Asked Questions
- Conclusion
How to Choose a PCIe SATA Card
Start with the number of drives. Count the drives that need a connection now, then add one or two spare ports. Four ports suit a desktop that needs two or three extra drives. Six ports suit a home server, a media library, or a network attached storage build where several drives will be added over time.
Next, check the PCIe slot. A PCIe x1 card fits into almost any PCIe slot, including x1, x4, x8, and x16 slots. A PCIe x4 card needs a PCIe x4 slot or a longer slot, and it generally provides more total bandwidth. That matters when several fast solid state drives are used at the same time. For mechanical hard drives, the host interface is less likely to be the limiting factor.
The controller manages the SATA ports and affects operating system support, so check the listed support for Windows, Linux, and macOS. SATA III speed is quoted as up to 6 Gbps per port, which is the speed for one port, not the combined speed of all ports at once. Combined throughput is limited by the PCIe connection.
Settle RAID support early. A non-RAID card presents each drive separately and suits software RAID, network attached storage software such as TrueNAS or Unraid, and simple storage expansion. A RAID card suits only buyers who want hardware RAID in a listed mode. Also check the bracket size for small cases, whether SATA cables are included, and whether the card supports booting from a connected drive.
1. StarTech 6-Port PCIe SATA Card
The StarTech 6-port PCIe SATA card is the premium pick, and the most complete option for a home server or a desktop that will hold several SATA drives. It uses a PCIe 3.0 x4 host interface and the ASM1166 controller, supporting six SATA III ports at up to 6 Gbps per port, with combined throughput of up to 16 Gbps according to the published specifications. That bandwidth makes it a good match for SATA solid state drives and for a larger set of mechanical hard drives.
The card includes low-profile and full-profile brackets, so it fits standard towers and compact cases. It is a non-RAID card, which suits software RAID, network attached storage software, and simple expansion where each drive is presented separately. The published specifications list support for Windows and Linux. The premium grouping reflects the brand, the PCIe 3.0 x4 interface, and the combined throughput figure.
Specs
| Specification | Detail |
|---|---|
| Brand | StarTech |
| SATA ports | 6 SATA III ports |
| Speed per port | Up to 6 Gbps |
| Host interface | PCIe 3.0 x4 |
| Controller | ASM1166 |
| Combined throughput | Up to 16 Gbps |
| RAID support | Non-RAID |
| Bracket | Low-profile and full-profile brackets included |
| Operating systems | Windows and Linux |
| Use case | Home server, desktop, and server storage expansion |
2. FebSmart 6-Port PCIe SATA Card
The FebSmart six-port card is a mid-range option with the same port count and the same ASM1166 controller as the premium pick, plus a PCIe 3.0 x4 host interface. It provides six SATA III ports at up to 6 Gbps per port, and it is described as plug and play on Windows, macOS, and Linux in the published product description. That broad support makes it flexible for a desktop that may change operating systems, or for a home server running Linux.
The card is a non-RAID host controller, so each drive is presented separately. That suits software RAID and network attached storage software, where the software manages the drives, and it suits simple expansion for files, backups, or a media library. The PCIe 3.0 x4 interface gives more total bandwidth than a PCIe x1 card, which matters when several drives are used together. Buyers should confirm whether SATA cables are included and that the power supply has enough SATA power connectors for six drives.
Specs
| Specification | Detail |
|---|---|
| Brand | FebSmart |
| SATA ports | 6 SATA III ports |
| Speed per port | Up to 6 Gbps |
| Host interface | PCIe 3.0 x4 |
| Controller | ASM1166 |
| RAID support | Non-RAID |
| Operating systems | Windows, macOS, and Linux |
| Installation | Plug and play as described in the product listing |
| Use case | Desktop storage expansion and home server builds |
3. MZHOU 6-Port PCIe SATA Card
The MZHOU six-port card is the budget pick for buyers who want six SATA ports and a complete set of cables in the box. The published listing states that the package includes six SATA cables, a SATA power splitter cable, and a low-profile bracket. That bundle removes the need to buy cables separately, which is useful for a first home server build or a desktop without spare SATA cables.
The card provides six SATA III ports at up to 6 Gbps per port, with support for 3 Gbps and 1.5 Gbps for older drives. It uses a PCIe 2.0 host connection and a controller based on the JMB575 chip, with hot swap support as described in the listing. The card lists support for Windows and Linux. The PCIe 2.0 connection gives a lower total bandwidth ceiling than the PCIe 3.0 x4 cards here, so it is best suited to mechanical hard drives and to builds where fast solid state drives are not all active at once.
Specs
| Specification | Detail |
|---|---|
| Brand | MZHOU |
| SATA ports | 6 SATA III ports |
| Speed per port | Up to 6 Gbps, with support for 3 Gbps and 1.5 Gbps |
| Host interface | PCIe 2.0 |
| Controller | JMB575 based controller |
| Hot swap | Supported as described in the product listing |
| Included in the box | 6 SATA cables, SATA power splitter cable, low-profile bracket |
| Operating systems | Windows and Linux |
| Use case | Budget home server, media library, and desktop storage expansion |
4. IO Crest 4-Port SATA III PCIe Card
The IO Crest four-port card is a budget option for a desktop that needs a small number of extra SATA ports and a card that fits a short PCIe slot. It uses a PCIe x1 host interface, compatible with PCIe x2, x4, x8, and x16 slots, so it can be fitted into almost any free PCIe slot. The card provides four internal SATA III ports at up to 6 Gbps per port, with backward compatibility for 3 Gbps and 1.5 Gbps.
The controller is the Marvell 88SE9215, and the card is a non-RAID controller. Each drive is presented separately, which suits simple storage expansion and software RAID. The listing states that the card is installed with a full-profile bracket and that a low-profile bracket is included, so it fits standard towers and compact cases. Support covers Windows and Linux, including older Windows versions listed in the product description. The PCIe 2.0 x1 connection shares total bandwidth across four ports, so it is best for mechanical hard drives and builds where only one or two drives are active at a time.
Specs
| Specification | Detail |
|---|---|
| Brand | IO Crest |
| SATA ports | 4 internal SATA III ports |
| Speed per port | Up to 6 Gbps, with support for 3 Gbps and 1.5 Gbps |
| Host interface | PCIe x1, compatible with x2, x4, x8, and x16 slots |
| Controller | Marvell 88SE9215 |
| RAID support | Non-RAID |
| Bracket | Full-profile bracket fitted, low-profile bracket included |
| Operating systems | Windows and Linux |
| Use case | Desktop storage expansion with a small number of extra drives |
5. GLOTRENDS 4-Port PCIe SATA Card
The GLOTRENDS four-port card is a mid-range option that stands out for boot support and included cables. The published listing states that it supports operating system booting, with only the first port supporting boot, while the other three ports are for data drives. That makes it useful for a desktop where the boot drive will be connected to the card, provided it is connected to the first port.
The card uses a PCIe 3.0 x1 host interface and the ASM1064 controller, providing four SATA III ports at up to 6 Gbps per port. The package includes SATA cables and a SATA power splitter cable. The listing states compatibility with Windows, Linux, macOS, and network attached storage use. The PCIe x1 connection fits a short slot, and total bandwidth is best suited to mechanical hard drives and builds where the drives are not all active at once.
Specs
| Specification | Detail |
|---|---|
| Brand | GLOTRENDS |
| SATA ports | 4 SATA III ports |
| Speed per port | Up to 6 Gbps |
| Host interface | PCIe 3.0 x1 |
| Controller | ASM1064 |
| Boot support | Operating system boot from port 1 only, as stated in the listing |
| Included in the box | SATA cables and SATA power splitter cable |
| Operating systems | Windows, Linux, macOS, and network attached storage use |
| Use case | Desktop and network attached storage builds, including a boot drive on port 1 |
Frequently Asked Questions
What is a PCIe SATA card?
A PCIe SATA card is an expansion card that fits into a PCIe slot and adds extra SATA III ports. Each port connects to one SATA hard drive or solid state drive with a standard SATA data cable. The card works alongside the motherboard storage controller, and drives connected to it appear in the operating system in the same way as drives connected directly to the motherboard, subject to driver and operating system support.
How many SATA ports do I need on a PCIe SATA card?
Count the drives that need a connection now, then add one or two spare ports. Four ports suit a desktop that needs two or three extra drives. Six ports suit a home server, a media library, or a network attached storage build where several drives will be added over time. A card with more ports than needed is usually simpler than adding a second card later, provided a suitable PCIe slot is available.
Does a PCIe SATA card work with SSDs and hard drives?
Yes, the cards in this guide support both SATA solid state drives and SATA hard drives. Each SATA III port supports speeds of up to 6 Gbps, with backward compatibility for 3 Gbps and 1.5 Gbps on several cards. Total speed when all drives are used at once is limited by the PCIe connection, so a PCIe 3.0 x4 card is the better choice when several fast solid state drives will be active at the same time.
Can I boot from a drive connected to a PCIe SATA card?
Boot support varies by card. The GLOTRENDS card in this guide supports booting an operating system from its first port only, according to the published listing. Other cards here are intended mainly for data drives, or they do not state boot support in the published specifications. If the card will hold the boot drive, check boot support before buying, and connect the boot drive to the port stated in the listing.
Conclusion
The best PCIe SATA card depends on how many drives need to be added and how they will be used. The StarTech six-port card is the premium choice for a home server or workstation with several drives, thanks to its PCIe 3.0 x4 interface, ASM1166 controller, and combined throughput of up to 16 Gbps. The FebSmart six-port card offers the same port count and controller in the mid-range group, with broad support for Windows, macOS, and Linux. The MZHOU six-port card is the budget choice for a media library or backup server, with six cables, a power splitter cable, and a low-profile bracket in the box.
For a smaller build, the IO Crest four-port card is a simple budget option that fits almost any PCIe slot and includes a low-profile bracket. The GLOTRENDS four-port card is the mid-range choice for a build that needs boot support, with booting from its first port and cables included. Before buying, confirm the PCIe slot, port count, controller, operating system support, and cables needed. A card that matches those details will add storage cleanly and leave room for the next drive.
As an Amazon Associate, we earn from qualifying purchases.
|—|—|
Further reading
- Best PCIe USB Cards for Faster Desktop Ports in 2026
- Best PCIe Sound Cards for Gaming and Music in 2026
- Best PCIe Ethernet Cards for Fast Wired Networking
- Best PCIe SSD Adapters for Fast NVMe Storage Upgrades
- Cyber Monday 2026: Best Gaming Monitors to Gift or Upgrade
- Best Mini PC Mounts That Free Up Desk Space in 2026